Automatic Tablet Coating Machine

Coating Pan / Drum

As a basic component, the SS316L interchangeable coating drum operates in a sealed and negative-pressure condition, and then the tablets are tumbled for coating and forming.

Spray system

The coating liquid was uniformly mixed by the mixing drum to avoid liquid supply conjunctive and pipe blockages. Then, the supply liquid was transported to the spray gun via a peristaltic pump. Adopt Senieer advanced structure, achieve uniform atomization

Air Handling System

In the automatic tablet coating machine, the cold air is purified via an air treatment unit (G4 primary filter, F8 secondary filter, and H13 HEPA filter) and then heated. A heat transfer state is formed within the raw material container. The heat transfer is accomplished through the direct contact between the hot air and the moist tablet solids. The moisture is carried away by the dry air. This process is continuously repeated, ultimately resulting in the formation of ideal and uniformly dried tablet. The exhaust gas is discharged into the deduster, and the dust is recycled.